Observe carefully
In order to optimize and improve heat dissipation performance, reduce noise EVGA GeForce RTX 30 series all air-cooled display card with 3 x wind configuration
- EVGA graphics card fan, using the asymmetric fan module, as well as the small "E" on the blade can effectively reduce the wind noise.
- If a graphics card temperature less than 55 ° C, fans will automatically shut down, silent video card experience.
- The central fan direct wind down 10 mm increased by 16%.
To maximize the display card heat exchange and cooling components
- Allow the air to air flow guide hole in the heatsink free shuttle away excess heat.
- Patent copper plate universal coverage GPU and RAM area, a 25% increase in thermal contact area, accelerate away the GPU and the heat energy produced is RAM.
- New 180 - degree heat pipe design and precise interval configuration, up 65% and fins contact area, the optimization of heat conduction.
Precise cutting holes in the PCB board and the back, will heat up air directly from the back out of display card, increase the cooling efficiency.
The graphics card has inserted a fan and a bit RGB.When your graphics card temperature rises, you can use to connect to the bottom of the fan plug to control wind speed.As for RGB connector, the fan can be synchronous RGB lamp to the graphics card on the Profile of but doing so may affect the overclocking performance video card.
In addition the card of the BIOS switch.But it's a pity that temporarily can only control the fan speed.If you intend to graphics for overclocking, it also can increase the fan speed.
Provides the x3 Display Port output and x1 HDMI output.
Software can be used to customize the RGB set on the graphics card, let every video card on the RGB is exclusive your uniqueness.
Published the echoes