EK, the premium liquid cooling gear manufacturer, is now offering 90-degree pre-bent acrylic tubing to help out liquid cooling beginners and also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
这些预弯管管的三个外径（OD） - 12毫米，14毫米和16毫米，标准尺寸由绝大多数液体冷却爱好者使用。它们由挤出的丙烯酸材料制成，含有玻璃状透明度，并且具有高度耐热。丙烯酸管较难弯曲。与PETG相比，它需要在更大的表面上更长的时间加热时间，这使得它不太受到首次硬管制造商的流行。但是现在，随着EK的新引进的预弯曲管道，对于一个人的第一个硬管环的丙烯酸的主要缺点消失了。
它的长度为0.8米（800毫米），可以容易地切割并缩短到任何管道运行的足够长度。倒角倒角倒角，以防止垫圈（O形环）损坏。
Specifically chosen, the 90-degree bend is the most common angle utilized in liquid cooling. One pack contains six 90-degree pre-bent acrylic tubes. These hard tubes are intended to be used with hard tube fittings, either push-in (HDP) or compression (HDC) fittings.
Availability and Pricing
EK-Loop Hard Tube 12/14/16 mm 0.8 m Pre-Bent 90 – Acrylic is made in Germany, Europe. It is available for order through the EK Webshop and Partner Reseller Network. In the table below, you can see the manufacturer suggested retail price (MSRP) with VAT included.
- EK-Loop Hard Tube 12 mm 0.8 m Pre-Bent 90 – Acrylic (6pcs) 54.90€
- EK-Loop Hard Tube 14 mm 0.8 m Pre-Bent 90 – Acrylic (6pcs) 59.90€
- EK-Loop Hard Tube 16 mm 0.8 m Pre-Bent 90 – Acrylic (6pcs) 64.90€
For more information, visit这一页。
